Any way to reduce CSR1000v load on CPU in EVE-NG? It is very CPU Intensive and increases the temperature very much. I need to lab SR and I know of no other image for regular IOS or IOS-XE that supports that.
There seems to be some kind of issue going on with the WLC (Cisco 5800 series) my organization uses. I am unable to configure new APs and the current APS are all disassociating from it. Any idea what's going on here???
Hi,I am getting the CDR error like below 10021 There are no matching recordsVerified under service parameters , cdr flag enabled True Please helpCUCM 11.5 Thanks
Rtr1 ----Cost1-----> Rtr2 (Area13)Rtr1 ----Cost1-----> Rtr3 (Area13)Rtr2 ----Cost10----> Rtr3 (Area10)Rtr2 ----Cost10----> Rtr4 (Area0) If i redistribute static route on Rtr2 then Rtr3 learns best route from Rtr1If i redistribute static route on Rtr4...
We are trying to use PLINK to export a list of active AnyConnect users via TFTP to a text file that's then parsed and displayed via HTML.We use a batch file with the following contents that calls a text file containing the required commands:plink -ss...
We recently had an issue where the HA was out of sync.We broke HA and resarted the servers in proper order and re-established HA.Verified the BDs were happy. Now we find that our persistant chat rooms are missing in the jabber clients. BUT..... It on...
Would it make sense to use a firewall for a 10 gbps layer 2 link between 2 sites? I'm thinking using a firewall for a 10 gbps connection would be very expensive. Is it worth it?
Hi all,I have locked myself out of the switch, more specifically, I can't enable. Every method of password recovery I have tried has failed. I do not know how to factory reset my two stackwise-enabled switches. I need a password recovery procedure th...
Hi all,I'm trying to do a POC with NSO 6 and some Arista vEOS routers in my lab. When using any Netconf NED on these Arista devices I get this error in NSO:admin@ncs# devices device spine-11 sync-fromresult falseinfo spine-11: Attribute time-modified...
Hey!I'm Chitransh, part of the team at SigNoz.Thanks for using SigNoz as one of the Observability backend for OpenTelemetry in this blog - https://www.thousandeyes.com/blog/data-observability-backend-opentelemetryI just wanted to point out a small c...
Hi, I have a question relating to the timezone for the dates returned in the OpenVuln API responses. For example, the following dates, are we to assume they are UTC? "firstPublished": "YYYY-MM-DDT16:00:00", "lastUpdated": "YYYY-MM-DDT19:16:46", Man...
Howdy Cisco Community!Need your help as fairly new trouble shooting site to site VPN connectivity.I am unable to establish VPN connectivity per information below.Site:1crypto ipsec ikev2 ipsec-proposal CSM_IP_1protocol esp encryption aes-256protocol ...
Hello Community,Is there any command to turn-off the paging of the commands output on Cisco iOS and display all output without paging? On Dell Switches, there's a command "terminal length 0", but the same doesn't seem available on Cisco iOS.Router#te...
Hi,I wonder which is the best way to monitor our DNA Center appliance. We have all our networking infrastructure monitored and we want to have DNA Center also under this tool (from SolarWinds). We usually monitor using icmp and SNMP. Is it possible t...